Sunday, September 9, 2012

Daily workhorse from now on


In the wake of exorbitant rise in Ron 97 fuel prices, inevitably I need to get a daily workhorse that is cheap to maintain, automatic, runs on Ron 95 and of course reasonably fun to drive (otherwise I’ll end up like other boring middle-aged men). So, welcome to latest addition, a used Proton Satria Neo 1.6 (A) born in 2006.

In terms of looks, the car is inspired by my old Satria GTi, carrying the sporty flavor from the DC5-like front headlamp, fairly flared wheel arches with lowered roofline giving the car a very low-slung with higher proportion of body-to-glass. Upon getting the car, the first thing I did was blacking out of the glass area at the rears making the car looks pleasing to the eye. The end result might not look like a predator poised to pounce but not exactly tamed pussy willing to get bullied either.

Like all Protons, the interior feels bare and crude with substandard plastics mostly ‘at home’ inside the cabin. That does not irk me as much as the ergonomics. Proton truly looks like a newbie in this department designing the interior for customers whom by nature going to behave like apes with badly designed seats, pathetic driving position and steering that feel bare bones in anyone’s hands. If there’s a small consolation I can give is perhaps the air conditioning system relaying cool air almost instantaneously than the previous predecessors.

This first generation of Satria Neo uses non-IAFM Campro twincam 1.6 litre supposedly offering 110bhp and 148nm around 4000rpm. For a car that weights the same as the Pocong, it offers adequate power to move around, even with aftermarket 4-2-1 extractor and catless exhaust system. After covering the distances of about 500 kms, I think the gearing is too long to extract more realistic juices out of the lethargic engine. Revving the car higher than 4000rpm does invite coarse metallic noise that irritates the Honda engines lover like me. And in a way, I’ve made a stupid decision on this car hoping the car can sip lesser fuel than the Pocong because it has taken 40 litres of Ron 95 covering about 295 kms. Luckily the Ron 95 does not cost much and I will reserve the final judgment on fuel economy after major refreshments buffet at my regular mechanic.

The moment I get passed all the negativities, for entry level hatch it’s really genuinely fun to drive thanks to the simple MacPherson struts upfront and multilink at the rear setup and tuned by guys who obviously know what they’re doing. The steering feels great and in tandem with the flowing of the suspension damping. Not exactly R56 MCS like, but you could trail brake as you turn into a corner, instigates a swivel, four wheel slides and the front bonnet should be able to pointing out of the corner very early in its radius. Hardly surprising that it's the norm choice of ride by lots of trackers and karters these days. The only hindrance I can see is that there is a surprisingly natural tendency towards understeer for a car that has symmetrical track width of 1710mm, wider than say 6R/9N Polo and Fiesta. Nevertheless it’s easy car to drive for anyone.

Before carrying it away, I don’t intend to meddle around this car as I do on the Pocong. So, everything will stay stock and cheap. Besides going for major service, I’m only thinking of replacing the 15” wheels and tyres with something a little bit more presentable. I do fancy something like 180sx/S13 15x6.5 or Rota Grid 1570 15x7 with reasonable new tyres. Oh well, let’s see how this new RM28k workaround for daily workhorse pans out and I’m still thinking about what name to give the car.

Might not look like a predator poised to pounce but not exactly tamed pussy willing to get bullied either.

 I'm at cross roads between the two lol

 My favourite is the rear view. But the wheels come with it have got to go for sure (if not refurbished and repainted)
 Option 1: Rota Grid 1570 15x7

Option 2: Original S13/180SX 15x6.5 but extremely rare. Might need to be refurbished and resprayed

Sunday, September 2, 2012

Lost wheel lock key

I've lost my wheel lock key a week before raya. Since then, it's been hell to source replacement including from VW service centers. Frankly I just can't comprehend as to why they don't have lock master keys as per any other VW service centers in other parts of the world. 

Anyway, through my own research, I found out out that there're about 12 different types of wheel locks fitted to 9N3 Polo GTIs randomly. Luckily I've been saved by a fellow Polo GTI owner. A quick visit to his home today made it possible to unlock the Pocong's wheel lock nuts using his lock key and replaces them with standard ones.

Speaking of my findings, here're the list of lock keys for the 9N3 Polo GTI owners just in case you lost it:
  • VW/Audi #51 (6 square splines)
  • VW/Audi #52 (7 square splines)
  • VW/Audi #53 (8 square splines)
  • VW/Audi #54 (9 square splines)
  • VW/Audi #55 (10 square splines)
  • VW/Audi #56 (11 square splines)
  • VW/Audi #57 (12 square splines)
  • VW/Audi #58 (13 square splines)
  • VW/Audi #59 (14 square splines)
  • VW/Audi #60 (15 square splines)
  • VW/Audi #61 (16 square splines)
  • VW/Audi #62 (17 square splines)

Mine with the 9 square splines

Thursday, August 23, 2012

K04-001 might be inevitable ... soon anyway

Although Wynn managed to soldier most of the cracks on the stock K03S turbo housing, there's one particular spot he can't is somewhere near the compressor shaft. While the engine is boosting fine now, the cracks will come back hunting me sooner or later.
 
The most easiest and 'worry free' upgrade would be Borg Warner K04-001 or OEM-ed from RP and CTS for less than USD1k. There won't be much of increase in hp but because of slightly larger housing, the power deliver should be more stronger and linear from mid range onwards. Pity that it is not water-cooled to disperse heat more efficiently.

Besides the the turbo, I definitely need to source for at least 380cc injectors, 3" MAF, custom remap and maybe after market turbo manifold. It won't be soon I hope...


Image taken from ECS Tuning USA

Teluk Bahang Rd. 6

@Teluk Bahang Rd. 6. Apart from mediocre road surface, I think this is one of the best winding roads in Penang. From Batu Ferringhi, the road started with wide sweeping corners and tightens all the way till the end. Definitely suited for agile and nippy hot hatches....





Captured using Samsung Galaxy S3. Although it comes with capabilities of setting ISO and aperture, I find it still has long way to go when it comes to noise reduction and depth. Nevertheless, the shutter speed is pretty impressive.

Say Hello to Samsung Galaxy S3

My hope of continuing marathon use of trusty but senile Nokia E72 has come to an end a day before Raya. I just had to put a stop with its growing appetite of freezing all the time. Furthermore, Maxis's recent RM799 offer for Samsung Galaxy S3 has sealed the deal without a heart beat considering I paid RM1.2k the predecessor S2 for wifey last year July. And that even cheaper than how much I paid for Nokia E72 when it was first launched in 2009, RM1.8k. 

Let see if this phone can last me for the next five years.....wishful thinking here :P

It comes with shoddy build quality though :(

Monday, August 6, 2012

Check Engine Light (CEL)

The Check Engine Light (CEL) pops up for the first time today. Must have been lazy to wake up early morning at 4am with ambient temperature ~18deg. Quick unplug the battery managed to shut up the CEL :)



Boost Leaks Fixed (for Now)

The Pocong was hospitalized for a week in Wynn’s for welding up the cracks on the K03S turbo housing that made of cast iron. At the same time, he also took the liberty in cleaning up the throttle body, AC blower and tighten up the engine’s subframe before ran full system checks. 

Upon collected the car last Saturday morning, I decided to drop over at Alex’s for 105k kms service considering Raya holidays is around the corner. Of course the welding exercise is just temporary solution as I was told there’s another crack near the compressor shaft which is not repairable and that means new turbo is inevitable after all. Oh well, I’m going to lay low for now :) 

Engine Oil: Liqui Moly Top Tech 5w40 RM222.40 
Oil Filter: VW 1.8T (06A 115 561 B) RM35.00 
Spark Plug: NGK Platinum V-Power BKR7E RM50.00 
Coolant: Redline Water Wetter RM65.00 Labour: 
Engine Oil, Oil Filter & Spark Plugs RM70.00 
Labour: Dismantling & Installing Turbo RM480.00 
Labour: Welding Turbo Housing RM75.00 

Total 997.40